Optocoupler with push-pull output 24V, plus/ground switching, Transmission frequency 200kHz. without end-cover. Optocoupler 24VDC - 200kHzPush-pull output, plus/ground switchingTransmission frequency 200kHzOutput 24VDC/100mAShort-circuit proofStatus display in output Fast switching times of 0,25µsMountable on 35mm cap rail TS35Mountable side by side via spring plugTension spring connectionShape 6,2mmHigh reliability, 5 years warranty The Optocoupler of the series OK1 have been developed for the galvanic isolation and / or the amplification of digital signals 5V TTL or 24V HTL up to 200kHz. They are mountable on norm cap rail. Datasheet

Power optocoupler for PWM signals. Housing 17,5mm. Power sopply 24Vdc. Transmission frequency max. 10kHz. Power amplifier for PWM-SignalsTransmission frequency max. 10kHz (PWM)Output max. 5...48Vdc / 10ASwitching of resistive and inductive loads3-way galvanic isolation between input-output-power supplyfor TS35 mounting rail installationclear terminal markingsmall dimensionsdesign 17,5mm, super flathigh reliability, 5-year warrantyThe PWM power amplifier / power optocoupler of the OK10 series was specially designed for the current amplification of PWM signals and is used to control and regulate the power of pulsed loads such as DC motors, heaters and valves. The devices have 3-way galvanic isolation between input/output and power supply. Input, output and power supply can thus be operated with different voltages. Four control voltages (3V, 5V, 12V and 24V) are available for controlling the optocoupler using a PWM signal.Datasheet

Optocoupler with push-pull output 24V, plus/ground switching, input current < 2mA, transmission frequency 500kHz. without end- cover Optocoupler 24VDC - 500kHz, input current < 2mA Push-pull output, plus/ground switchingInput current < 2mATransmission frequency 500kHzOutput 24VDC/50mAShort-circuit proofStatus display in outputFast switching times of 0,1µsSupply 5VDCMountable on 35mm cap rail TS35Mountable side by side via link plugTension spring connection Shape 6,2mmHighreliability, 5 years warranty The Optocouplers of the series OK11 are particularly suitable for the galvanic isolation of high ohmic digital outputs, because they require an input current of only < 2mA.Datasheet

Optocoupler with push-pull output 5V, plus/ground switching, tranmission frequency 500kHz. without end-cover. Optocoupler 5VDC - 500kHzPush-pull output, plus/ground switchingTransmission frequency 500kHzOutput 5VDC/100mA, short-circuit proofStatus display in outputFast switching times of 0,1µsMountable on 35mm cap rail TS35Mountable side by side via link plugTension spring connection Shape 6,2mmHigh reliability, 5 years warrantyThe Optocouplers of the series OK2 have been developed for the galvanic isolation and / or the amplification of digital signals with 5V TTL or 24V HTL up to 500kHz. They are mountable on norm cap rail.Datasheet

Optocoupler with push-pull output 5V, plus/ground switching, input current < 2mA, transmission frequency 500kHz, without end-cover. Optocoupler 5VDC - 500kHz, input current< 2mA Push-pull output, plus/ground switching Input current < 2mATransmission frequency 500kHzOutput 5VDC/100mAShort-circuit proof Status display in output Fast switching times of 0,1µsSupply 5VDCMountable on 35mm cap rail TS35Mountable side by side via link plug Tension spring connection Shape 6,2mmHigh reliability, 5 years warranty The Optocouplers of the series OK21 are particularly suitable for the galvanic isolation of high ohmic digital outputs, because they require an input current of only < 2mA.Datasheet

Optocoupler with power output 24V/3A, 1-channel, shape 6,3mm. Power-Optocoupler 24VDC/3A Solid State RelaisSwitchable in parallel for power increaseTransmission frequency 1kHzOutput 24VDC/3APermanent short-circuit proofExcess temperature switch offOver- / undervoltage switch offStatus display in outputMountable on 35mm cap rail TS35Mountable side by side via link plugTension spring connectionShape 6,2mmHigh reliability, 5 years warranty The power-optocouplers of the series OK3 have been developed for the galvanic isolation resp. amplification of digital signals. They are suitable for directly switching of ohmic- and inductive loads with voltages of 24Vdc and currents up to 3A.Datasheet

Optocoupler with power- output 24V/3A, 4-channels, shape 17,5mm. 4-channel Power-Optocoupler 24VDC/4x 3A Solid State Relais Switchable in parallel for power increaseTransmission frequency 1kHzOutput 4x 24VDC/3APermanent short-circuit proofExcess temperature switch off Under- / overvoltage switch offStatus display each channel in outputMountable on 35mm cap rail TS35Clear terminal labelingNarrow design, shape 17,5mm, superlowHigh reliability, 5 years warrantyThe power-optocouplers of the series OK4 have been developed for the galvanic isolation and amplification of digital signals. They are suitable for directly switching of ohmic- and inductive loads and can be used for example for switching valves or brakes. Datasheet

Optocoupler with transistor output up to 250Vdc / 100mA; shape 6,3mm; without end-cover. Optocoupler with transistor output 0 to 250VOptocoupler with free transistor outputInput voltage 5V, 12V, 24V, 48V, 60VDCTransmission frequency max. 500HzOutput 0…250VDC / 100mAStatus display Switching time 2,5µs / 100µsMountable on 35mm cap rail TS35Tension spring connection Shape 6,2mmHigh reliability, 5 years warrantyThe devices of the optocouplers series OK5 provide the user with a free transistor output, which can be used as a NPN or PNP output. It is suitable for switching DC signals in the range of  0…250VDC with a maximum load of 100mA. Furthermore there is the possibility, by a suitable wiring, to create a "Wired-OR" linkage.The driving, depending on the device type, is operating with a DC voltage in the range of 5 to 60V DC. It can be configured by the user with soldering jumpers or can be ordered preconfigured from us by using our order code.Datasheet

Optocoupler with AC input voltage, output PNP,NPN or potential-free contact.Input voltage 115V, 230V, 400V ACOutput (PNP) or ground (NPN) switch or potential-free contactSwitching current max. 500mAMountable on 35mm cap rail TS35Stackable via plug-in jumpersShape 6,2mmTension spring connectionHigh reliability, 5 years warrantyMountable on 35mm cap rail TS35The OK6 series optocouplers are controlled with an alternating voltage, depending on the device variant in the steps of 115V AC / 230V AC / 400V AC. The optocouplers have a plus or earth-switching transistor output or a potential-free contact. It is suitable for switching DC signals with a maximum load of 500mA. The switching status is indicated by a green LED on the positive or earth-switching transistor output. This is not required for the device variant with potential-free contact. The OK6 optocoupler series is supplied with a mounted end plate.Datasheet