Power amplifier for norm signals / Set point-amplifier up to ±200mA, Housing 22,5mm low.Output 0…±10V / ±200mAOffset and amplification adjustableSupply 24VDCMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape22, 5mm, lowHigh reliability, 5 years warrantyThe devices of the power- / set point amplifiers series LV200 have been developed for the power amplification of voltage values 0…±10V and can be loaded up to ±200mA. Offset „0“and amplification „V“ are adjustable via a 20-way rotary switch. Driven is the power amplifier by an analog signal of 0…±10V, 0…±20mA or 4…20mA. The maximum output voltage can be adjusted with potentiometer „V” in the range of 0…100% of the input value.Datasheet

Proportional amplifier for clutches and brakes up to 6A. Shape 17,5 mm. Proportional - Amplifier / - ControllerControl current up to 1A, 3A resp. 6A / 40VDCPI-controller additional integratedSignal amplifier additional integrated250Hz or 5kHz PWM - frequencyOutput current 0...100% adjustablePI - amplifying from 0...100% adjustableOFFSET from 0...20% adjustableStatus display for controller enable Mountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 17,5mmHigh reliability, 5 years warrantyThe devices of the proportional amplifier series PV1 have been developed for driving and controlling valves, clutches, brakes and similar inductive loads up to 6A. They transduce a norm signal 0...10V or 0...20mA into a proportional current. A PI-controller and a free adjustable analog amplifier for actual value- or set-point value adjustment is also availably. Datasheet

Proportional amplifier for clutches, vales and breaks up to 6A. Pulse frequency 200Hz or 5kHz. Housing 17,5 mm. Control current max. 6A / 40VDC200Hz or 5kHz PWM – frequencyOutput current adjustableOffset adjustableVoltage- or current inputMountable on 35mm cap rail TS35Clear terminal labelingShape 17,5mm, super lowHigh reliability, 5 years warrantyThe devices of the proportional amplifier series PV2 have been developed for controlling valves, clutches, brakes and similar inductive loads. Depending on the application there is the choice between two PWM frequencies (200Hz or 5 kHz). The driving is done via analog norm signals. Thereby for the user is each one voltage input 0…10V (terminal 4) or a current input 0(4)…20mA (terminal 5) at disposal. The output current is proportional to the input value and is adjustable with potentiometer (V) in the range of 0…100% of the unit rated current. An offset shift is also possible by using potentiometer (0).Datasheet

Power amplifier for servo control valves up to 100mA, shape 22,5mm. Power amplifier for servo control valvesOutput current up to ±100mAFor servo control valvesOffset and gain adjustableDither- frequency and Dither-amplitude adjustableSupply 24V / DCMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 22,5mm lowHigh reliability, 5 years warranty The servo amplifier of the series SV100 have been developed for the driving of servo-control valves with a current consumption up to 100mA. Driven is the module via an analog norm signal  0....10V or 0(4)...20mA. Offset, output current, Dither frequency and Dither amplitude are freely adjustable via a 20-turn spindle operated potentiometer. Datasheet

Universal summation amplifier for analog signal processing. Shape 17,5mm. Universal Amplifier / Precision Summation Amplifier Voltage- or current output 5 inputs 2 non negating 3 negating High precision, linearity error < 0,003% Amplification range 0,5 - 32 fach, fine adjustable Free potentiometer Free 10VDC reference voltage Mountable on 35mm cap rail TS35 Clear terminal labeling Narrow design  Shape 17,5mm PB - Power-Bus - compatible High reliability, 5 years warrantyWith the universal amplifiers of the series UV1 analog norm signals can be added, subtracted and amplified.Datasheet