Isolation amplifier unipolar, power supply 24V DC, shape 6,2mm. Isolation amplifier unipolarLinearity error < 0,2%Unipolar in- and outputsTransmission frequency 25HzGalvanic 3-way isolation between input - output - supply voltageTest voltage 1,5kVMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 6,2mmHigh reliability, 5 years warrantyThe isolation amplifiers  of the seriesTV10 have been developed for galvanic isolation of DC current- or voltage signals. Therefore a 3-way isolation between input - output and supply voltage is generated. The isolation amplifier is available in two versions: 0..10V - 0...10V and 0(4)...20mA - 0(4)...20mA. Offset and gain are fixed.Datasheet

Isolation amplifier biipolar, power supply 24V DC, shape 6,2mm. Isolation amplifier unipolarLinearity error < 0,2%Biipolar in- and outputsTransmission frequency 25HzGalvanic 3-way isolation between input - output - supply voltageTest voltage 1,5kVMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 6,2mmHigh reliability, 5 years warrantyThe isolation amplifiers  of the seriesTV11 have been developed for galvanic isolation of DC current- or voltage signals. Therefore a 3-way isolation between input - output and supply voltage is generated. The isolation amplifier is available in two versions: 0...±10V - 0...±10V and 0...±20mA - 0...±20mA. Offset and gain are fixed.Datasheet

Fast isolation amplifier 25kHz, bipolar, universal power supply 20...253V AC/DC, shape 22,5 mm low. Fast isolation amplifier, bipolar Linearity error < 0,025%Bipolar in- and outputsTransmission frequency 25kHzGalvanic isolation between input - output - supplyTest voltage 2,5kV Universal supply 20...253Vac/dcMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 22,5mm, lowHigh reliability, 5 years warranty The devices of the series TV17 isolation amplifiers are specified for high transmission frequencies up to 25kHz and an accuracy of 0,025%. They are used for galvanic isolation or converting of DC current- and/or voltage signals.They are particulary suitable for using in high dynamic test stands. Therefore a 3-way potentional isolation between input - output and power supply is generated.  Because of its simple construction it is not necessary to configure this unit complicated. The modules are delivered with a fixed in- and output configuration. This avoids problems during the startup.  Datasheet

Isolation amplifier bipolar, power supply 24V DC, shape 17,5mm. Isolation amplifier bipolarLinearity error < 0,05%Bipolar in- and outputsTransmission frequency 2kHz / 5kHzComparison (optional) of zero point and amplificationGalvanic 3-way isolation between input - output - supply voltage Test voltage 2,5kV Mountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 17,5mm, superlowHigh reliability, 5 years warrantyThe isolation amplifiers of the seriesTV1 have been developed for galvanic isolation resp. amplification of bipolar norm signals 0...±60mV, 0...±10 V, 0...±20 mA and are normally operating with a transmission frequency of  2kHz. A  power supply of 24V DC is reqired. The shape of the isolation amplifier is 17,5mm.Datasheet

Isolation amplifier unipolar, power supply 24V DC, shape 17,5mm. Isolation amplifier unipolarLinearity error < 0,05%Unipolar in- and outputsTransmission frequency 25Hz / 2kHz / 5kHzComparison (optional) of offset and amplificationGalvanic 3-way isolation between input- output - supply voltageTest voltage 2,5kVMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 17,5mm, superlowHigh reliability, 5 years warranty The isolation amplifiers of the seriesTV2 have been developed for galvanic isolation resp. amplification of unipolar norm signals. The isolation amplifiers are normally operating with a transmission frequency of  25Hz. Therefore they are ideally suitable for signal filtering. A power supply of 24V DC is reqired. The shape is 17,5mm.Datasheet

Isolation amplifier bipolar,universal power supply unit 20...255Vuc, shape 22,5mm. Isolation amplifier bipolarLinearity error < 0,05%Bipolar in- and outputsTransmission frequency 2kHz / 5kHzComparison (optional) of offset and amplificationGalvanic isolation between input - output - supply voltageTest voltage 2,5kVSupply 20...253VUCMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 22,5mmHigh reliability, 5 years warrantyThe isolation amplifiers of the series TV3 have been developed for galvanic isolation of the different bipolar norm signals 0...±10 V, 0...±20 mA. They are operating with a limit frequency of  2kHz and are equipped with an universal power supply 20...255V AC/DC.Datasheet

Isolation amplifier unipolar, universal power supply unit 20...255Vuc, shape 22,5mm. Isolation amplifier unipolar Linearity error < 0,05%Unipolar in- and outputsTransmission frequency 2kHz / 5kHzComparison (optional) of offset and amplificationGalvanic 3-way isolation between input - output - supply voltage Test voltage 2,5kVSupply 20...253VUCMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 22,5mmHigh reliability, 5 years warrantyThe isolation amplifiers of the series TV4 have been developed for the galvanic isolation of the different unipolar norm signals 0..10 V, 0...20 mA und 4...20 mA. They are operating with a limit frequency of  2kHz and are equipped with an universal power supply 20...255V AC/DC. Datasheet

Isolation amplifier bipolar, power supply 24V AC/DC, narrow shape 12,5 mm. Isolation amplifier bipolar, shape 12,5mmLinearity error < 0,05%Bipolar in- and outputsTransmission frequency 2kHz / 10kHz*Galvanic 3-way isolation between input - output - supply voltageTest voltage 2,5kVComparison of offset and amplificationSupply 24VUCMountable on 35mm cap rail TS35Clear terminal labelingNarrow design, shape12,5mmHigh reliability, 5 years warrantyThe isolation amplifiers of the series TV5 have been developed for the galvanic isolation resp. amplification of bipolar norm signals 0...±10 V, 0...±20 mA. The modules are characterized by their narrow shape of 12,5mm. A power supply of 24V AC/DC is required.Datasheet

Isolation amplifier calibrated switchable, unipolar, power supply 24V DC, shape 17,5mm. Calibrated switchable isolation amplifier, unipolarLinearity error < 0,1%Unipolar in- and outputsTransmission frequency 25HzIn- and outputs calibrated switchableComparsion of offset and gain Galvanic 3-way isolation between input - output - supplyTest voltage 2,5kVSupply 24VucMountable on 35mm cap rail TS35 Clear terminal labelingNarrow designShape 17,5mm, superlowHigh reliability, 5 years warrantyThe isolation amplifiers of the series TV6 have been developed for the galvanic isolation resp. amplifying of  DC current- and/or voltage signals. Therfore a 3-way potentional isolation between input, output and power supply is generated.  The isolation amplifier is calibrated switchable via an 6 Dip-switch and can be easily adjusted by the user to the normsignals 0...10V, 2...10V, 0...20mA and 4...20mA for in- and output. Should it be necessary to level the offset or gain to the used operating system, there is a 20-turn spindle- operated potentiometer for the fine adjustment at disposal. Datasheet

Fast isolation amplifier 25kHz, bipolar, power supply 24V DC, shape17,5mm. Fast isolation amplifier, bipolar Linearity error < 0,025%Bipolar in- and outputsTransmission frequency 25kHzGalvanic isolation between input - output - supplyTest voltage 2,5kV Supply 24VucMountable on 35mm cap rail TS35Clear terminal labelingNarrow designShape 17,5mm, superlowHigh reliability, 5 years warranty The devices of the series TV7 isolation amplifiers are specified for high transmission frequencies up to 25kHz and an accuracy of 0,025%. They are used for galvanic isolation or converting of DC current- and/or voltage signals.They are particulary suitable for using in high dynamic test stands. Therefore a 3-way potentional isolation between input - output and power supply is generated.  Because of its simple construction it is not necessary to configure this unit complicated. The modules are delivered with a fixed in- and output configuration. This avoids problems during the startup.  Datasheet

Isolation amplifier uni-/bipolar, customer specified , power supply 24V AC/DC, narrow design 12,5 mm. Isolation amplifier uni- / bipolar, customer specifiedInput up to 250V / 200mA possibleLinearity error < 0,05%Uni-/bipolar in- and outputsTransmission frequency 25Hz, 2kHz, 10kHz*Galvanic 3-way isolation between input - output - supplyTest voltage 2,5kVComparison of offset and gainSupply 24VUCMountable on 35mm cap rail TS35Clear terminal labelingNarrow design shape 12,5mmHigh reliability, 5 years warrantyThe isolation amplifiers of the series TV8 are adjusted according to customers specification and are transforming voltages up to ±250 V or currents up to ±200 mA into analog norm signals.A power supply of 24V AC/DC is required.The shape is12,5mm.Datasheet

Isolation amplifier calibrated switchable, unipolar, power supply 24V DC, shape 6,2mm. Isolation amplifier calibrated switchable, unipolarLinearity error < 0,1%Unipolar in- and outputsTransmission frequency 10Hz / 100Hz In- and outputs calibrated switchableOffset and gain adjustableGalvanic isolation between input - output - supply voltageTest voltage 1,5kVSupply 24VdcMountable on 35mm cap rail TS35Clear terminal labelingPB-Power-Bus-compatibleNarrow designShape 6,2mm, superlowHigh reliability, 5 years warranty  The isolation amplifiers of the series TV9 have been developed for the galvanic isolation resp. amplifying of DC current- and/or voltage signals. Therefore a 3-way isolation between input - output and supply voltage is generated. The isolation amplifiers are calibrated switchable via 8 Dip-switches so that they can easily be adjusted to norm signals 0...10V, 2...10V, 0...20mA and 4...20mA for in- and output. Should it be necessary to level the offset or gain to the used operating system, for the fine adjustment there is a 20-turn spindle potentiometer at disposal.Datasheet